View PE60FLGRW204MA_4502280.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PE60
Vishay Sfernice
Power Panel Potentiometer
FEATURES
* High power rating (6 W at 50 C) * Cermet element * Full sealing * Mechanical strength * Industrial and professional grade * Tests according to CECC 41 000
RoHS
COMPLIANT
DIMENSIONS in millimeters PE 60 L
FR = 50 (1.969) 150 (5.872) Min O 25 8 18 (0.709) FG = 16 (0.630) FL = 25 (0.984)
150 (5.872) Min
PE 60 F
GR = 50.8 (2) 18 (0.709) GB = 12.7 (1/2) GJ = 22.22 (7/8) Slot 1 x 1.8 deep (0.039 x 0.071) O 6.35 (0.250)
O6 (0.236) Slot 1 x 1.8 deep Thread M 10 x 75 (0.039 x 0.071) 12 (0.472) wrench = 14 (0.551)
9.52 (3/8)
Thread 3/8 32-UNEF-2A wrench = 12.5 (0.492)
OPTION D: DBAN SHAFT LOCKING
wrench = 14 (0.551) wrench = 12 (0.472) O6 (0.236)
OPTION L: PE 60 LPRP - WITH LOCATING PEG
3 (0.118) 0.8 (0.031)
12.5 (0.492) 9.2 (0.362)
O 1.8 (0.071)
6.5 (0.256) 15 (0.591) Available only with PE 60 L
3 (0.118) Available on PE 60 L and PE 60 F
2.3 (0.091)
Panel sealed version PE 60 M OPTION E: Including locating peg (available only for PE 60 M)
8 0.2 (0.315 O 1.2 0.008) (0.047) 21 (0.825) 0.7 (0.028) 9 (0.356) Flat Located O6 (0.236)
CIRCUIT DIAGRAM
Yellow (1)
Green (3) CW (2) Red
O 10.5 (0.413)
Sealing ring FD = 13 (0.514) FJ = 22 (0.868) FP = 47 (1.852)
Available only with bushing M10 x 0.75 and shafts O 6 mm
www.vishay.com 134
For technical questions, contact: sfer@vishay.com See also: Application notes
Document Number: 51005 Revision: 05-Jun-08
PE60
Power Panel Potentiometer
Vishay Sfernice
SPECIAL FEATURES COMMAND SHAFT
Length is measured from the mounting surface to the free end of the shaft. The screwdriver slot is aligned with the wiper within 10. Special shafts are available, in accordance to drawings supplied by customers. We recommend that customers should not machine shafts, in order to avoid damage.
SHAFT LOCKING: DBAN
The shaft locking device consists of a tapered nut tightening a slotted notched washer against both bushing and shaft. DBAN tightening torque is 200 Ncm, shaft locking torque being 30 Ncm. DBAN is also available with all special types. This device is normally supplied in a separate bag. Can be pre-mounted on request.
PANEL SEALING: PE60M
The panel sealing device consists of a ring located in a slot on the potentiometer face. Sealing is obtained by tightening the ring against the panel when mounting the potentiometer.
LOCATING PEG: LPRP
Location is obtained by fitting a special washer on the potentiometer face. The peg can therefore be positioned at 90, 180, 270 and 360.
ELECTRICAL SPECIFICATIONS
Resistive Element Electrical Travel Resistance Range Standard series E3 Tolerance Power Rating Temperature Coefficient Limiting Element Voltage (Linear Law) Contact Resistance Variation (Linear Law) End Resistance (Typical) Dielectric Strength (RMS) Insulation Resistance (500 VDC) Standard On Request Linear Logarithmic Linear Law Logarithmic Laws cermet 270 10 1 to 1 M 100 to 2.2 M 1 - 2 - 2.5 - 5 20 % 10 % - 5 % 6 W at + 50 C 3 W at + 50 C see Standard Resistance Element Data 350 V 3 % Rn or 0.5 0.5 or 1 % 2500 V 106 M
MECHANICAL SPECIFICATIONS
Mechanical Travel Operating Torque (max. Ncm) End Stop Torque (max. Ncm) Max Tightening Torque of Mounting Nut (Ncm) Unit Weight (max. g) 250 25 to 35 300 5 3 typical 70
ENVIRONMENTAL SPECIFICATIONS
Temperature Range Climatic Category Sealing - 55 C to + 125 C 55/125/56 fully sealed container IP67
POWER RATING CHART
6 LIN. LAW "A"
RESISTANCE LAWS
100
% TOTAL RESISTANCE
80 F 60 A L 40
POWER IN W
LOG. LAWS "L & F" 3
20
0 0
0
20 40 60 70 80 100 125 140
0
20
40
60
80
100
AMBIENT TEMPERATURE IN C
% CLOCKWISE SHAFT ROTATION
Document Number: 51005 Revision: 05-Jun-08
For technical questions, contact: sfer@vishay.com See also: Application notes
www.vishay.com 135
PE60
Vishay Sfernice
PERFORMANCE
TYPICAL VALUES AND DRIFTS TESTS CONDITIONS Phase A dry heat 125 C Phase B damp heat Phase C cold - 55 C Phase D damp heat 5 cycles 56 days 25 000 cycles 1000 hours at rated power 90'/30' - ambient temp. 25 C 5 cycles - 55 C at + 125 C 50 g at 11 ms 3 successive shocks in 3 directions 10 - 55 Hz 0.75 mm or 10 g during 6 hours RT (%) RT 0.5 % 0.5 % Insulation resistance: > 104 M 3% Contact res. variation: < 5 % Rn 3% Contact res. variation: < 3 % Rn (0.5 % 0.1 ) 0.1 % 0.2 % R1-2 (%) R1-2 1% 1%
Power Panel Potentiometer
Climatic Sequence
Long Term Damp Heat Rotational Life Load Life Rapid Temperature Change Shock
Vibration
0.1 %
0.2 %
STANDARD RESISTANCE ELEMENT DATA
STANDARD RESISTANCE VALUES 1 2 5 10 20 25 50 100 200 250 500 1K 2K 2.5K 5K 10K 20K 25K 50K 100K 200K 250K 500K 1M 6 4.90 2.45 1.23 0.61 0.49 0.25 0.12 350 LINEAR LAW MAX. POWER AT 25 C W 6 MAX. WORKING VOLTAGE V 2.4 3.5 5.5 7.7 11.0 12.2 17.3 24.5 34.6 38.7 54.8 77.5 110 122 173 245 346 350 TYPICAL TCR MAX. CUR. THROUGH - 55 C + 125 C WIPER mA 2449 1732 1095 775 548 490 346 245 173.2 154.9 109.5 77.5 54.8 49.0 34.64 24.49 17.32 14.00 7.00 3.50 1.75 1.40 0.70 0.35 250 500 ppm/C
MARKING
Printed: - VISHAY trademark - SAP Part number - manufacturing date
PACKAGING
- in box of 5 pieces
www.vishay.com 136
For technical questions, contact: sfer@vishay.com See also: Application notes
Document Number: 51005 Revision: 05-Jun-08
PE60
Power Panel Potentiometer
Vishay Sfernice
SAP ORDERING INFORMATION (Part Number 18 digits)
P E 6 0 L 0 F G W 2 0 4 M A
MODEL
BUSHING M = Panel sealed L = STD F = 3/8"
OPTION 0 = none For L Bushing D = DBAN L = LPRP B = DBAN and LPRP For F Bushing L = LPRP
SHAFT For L Bushing FG 16 mm, slotted FL 25 mm, slotted FR 50 mm, plain For F Bushing GB 1/2", slotted GJ 7/8", slotted GR 2", slotted
LEADS W: Wire
OHMIC VALUE 204 = 200 k
TOLERANCE 20 % on request 10 % 5%
LAW A = Linear L = clockwise logarithmic F = clockwise inverse logarithmic
SPECIAL NUMBER (if applicable) Given by VISHAY for custom design
For M Bushing For M Bushing FD = 13 mm, slotted FJ = 22 mm, slotted E = Peg FP = 47 mm, plain
PART NUMBER DESCRIPTION (for information only)
PE60 MODEL L BUSHING 0 OPTION FG SHAFT W LEADS 200 k OHMIC VALUE 20 % TOL A LAW BO5 PACKAGING SPECIAL SPECIAL e4 LEAD (Pb)-FREE
Document Number: 51005 Revision: 05-Jun-08
For technical questions, contact: sfer@vishay.com See also: Application notes
www.vishay.com 137
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000 Revision: 18-Jul-08
www.vishay.com 1

▲Up To Search▲

Price & Availability of PE60FLGRW204MA

	To Download PE60FLGRW204MA Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .